GN Solids Control shipped 3 packages of drilling rig solids control equipment for one South American customer last month, it mainly includes shale shakers, mud cleaners, centrifugal pumps, decanter centrifuges and feeding pumps.
GN Solids Control has rich experience of providing solids control equipment and drilling waste management equipment to global drilling contractors, although under pandemic, GN Solids Control still shipped hundreds of shakers and decanter centrifuges in 2022.
1.GN Shale Shaker, GNZS594J
GN Shale shaker is the first phase drilling mud solids treating unit, it is mainly used to remove big solids after the poor boy degasser.
GN Solids Control shipped 12 sets of shale shakers to this South American customer, who has been using GN Solids Control equipment in multiple sites.
2.GN Mud Cleaner, GNZJ594J-3S16N
Totally 3sets drilling rig solids control equipment are provided, so the mud cleaner GN shipped 3 sets GNZJ594J-3S16N with 3 units big desander cyclones and 16 sets 4 inch desilter cyclones.
GN Cyclones remove effluent from shaker with above 100 microns and downsize to 55 microns after go through the desander cyclones, then reduce to 25 microns after the desilter cyclones. 3.GN Centrifugal Pump
All the cyclones should have one feeding pump individually, all the GN mud cleaners GN Solids Control use centrifugal pump as the feeding pump, put on the side of the mud tank to save room.
GN made centrifugal pump is wear resistant and can use for a long time without broken. All centrifugal pump parts are interchangeable with NOV mission magnum pump parts.
4.GN Middle Speed Decanter Centrifuge, GNLW363D
3 sets GN middle speed decanter centrifuge will separate solids larger than 2-5 microns. These 14 inch bowl decanter centrifuges remove solids from quantity under middle speed.
5.GN High Speed Decanter Centrifuge, GNLW363D
To remove even finer particles, GN Solids Control also shipped 3 sets 14 inch bowl of high speed decanter centrifuges GNLW363D.
6.GN Feeding Screw Pump, GNG30-075C
GN screw feeding pump GNG30-075C is fix flow rate feeding pump with every screw circle. It is an effective feeding pumps for decanter centrifuge, as it can be controlled easily in the HMI tough screen control panel.