Recently, GN Solids Control, a leading manufacturer of solids control and waste management equipment, successfully exported four sets of its GNLW223D drilling decanter centrifuges to overseas customers. This significant milestone not only underscores the company’s strong international presence but also showcases the high demand for its advanced drilling centrifuges.
Author: admin
GN Solids Control Successfully Delivers Six Sets of GNLW363D-FHD Fully Hydraulic Decanter Centrifuges to Asian Customers, Meeting High-Standard Demands with Exceptional Performance
GN Solids Control, a leading manufacturer of decanter centrifuges in the industry, has collaborated with a renowned Swiss hydraulic technology company to successfully develop and produce the GNLW363D-FHD fully hydraulic decanter centrifuge. This centrifuge has won widespread praise and trust from Asian customers due to its superior fully hydraulic drive system and outstanding performance in high-temperature environments.
GN Exports High-Efficiency Drilling Fluid Mud Cleaner Indonesian Customers, Boosting Upgrades in Oil Drilling Operations
GN Solids Control has shipped four sets of drilling fluid desander cleaners, desilter cleaners, and shale shakers for drilling rigs to Indonesian customers. This transaction not only demonstrates GN’s professional strength in the field of oil drilling equipment but also showcases its deep engagement in the international market and a high level of attention to customer needs.
Regarding the working principles of these cleaners, the desander and desilter cleaners primarily rely on centrifugal force and vortex effects to achieve solid-liquid separation. As the drilling fluid passes through the hydrocyclone, it generates a rotating motion, causing solid particles to deposit on the wall of the hydrocyclone due to centrifugal force, while the cleaner liquid flows inward and exits through an outlet. This process effectively removes sand and silt particles from the drilling fluid.
On the other hand, the shale shaker utilizes vibration to separate solid particles from the drilling fluid. As the shale shaker vibrates, the drilling fluid flows over the screen, and solid particles larger than the screen openings are retained on the screen while the smaller particles and liquid pass through. This process further cleanses the drilling fluid.
GN’s ability to supply these four sets of equipment to Indonesian customers reflects its rich experience and strong capabilities in the field of oil drilling equipment. Through cooperation with Indonesian customers, GN can further expand its share in the international market and make positive contributions to the development of the local oil drilling industry. The working principles of the cleaners ensure efficient and reliable solid-liquid separation, supporting smooth and efficient drilling operations.
GN Solids Control Systems Sold to Non-Excavation Clients in Asia
Two sets of GNMS-1500GPM Mud Cleaning System and one set of GNMS-200 Mud Recycling System were recently sold to clients in Asia for non-excavation purposes.
Continue reading “GN Solids Control Systems Sold to Non-Excavation Clients in Asia”
Exported High G Drying Shaker and Horizontal Decanter Centrifuge to Oman Project
This project involves a spiral conveying hopper, a high G drying shaker module GNZS594J, and a decanter centrifuge module GNLW363D. Continue reading “Exported High G Drying Shaker and Horizontal Decanter Centrifuge to Oman Project”
GN dispatched high-frequency Stack Vibrating Screen to domestic customers in the Shanxi coal mining industry.
GN dispatched high-frequency Stack Vibrating Screen to domestic customers in the Shanxi coal mining industry.
The GN high-frequency Stack Vibrating Screen is primarily used for wet screening and dehydration operations of fine-grained materials in industries such as ore dressing and coal preparation. It can be configured with 2 to 5 layers according to on-site requirements.
Developed by GN, the stack sizer utilizes the principle of dual-frequency resonance and is driven by a single excitation source (vibration motor assembly) to achieve linear vibration. The unique vibration mode of the GN high-frequency Stack Vibrating Screen sizer is energy-efficient, with high screening efficiency and large processing capacity. It is technologically advanced, structurally simple, and operates reliably and stably, making it a leading screening equipment in the field of fine-grained material screening. The GN high-frequency Stack Vibrating Screen adopts flexible polyurethane fine screens with a high opening rate (28-45%), with an average lifespan of over 6 months.
Features of the GN stack sizer high-frequency fine screen:
- Designed based on the principle of dual-motor synchronization, the screen box performs linear motion.
- Equipped with advanced imported vibration motors (Martin motors or OLI motors) with reliable operation and long service life without failures.
- The stack sizer screen box is arranged in multiple layers, providing advantages such as small footprint, high processing capacity per unit area, high screening efficiency, low power consumption, low dynamic load, simple operation, stable performance, durability, and low maintenance compared to similar screens.
- Utilizes flexible polyurethane screen panels with good elasticity and resistance to clogging. Each single-layer screen box can accommodate two to three screen panels.
- Screen panels are secured using bolted assemblies, making them easy to operate and reliable to fasten.
- The vibrating screen surface is treated using sandblasting process and coated with heavy-duty anti-corrosion paint for good corrosion resistance. The surface in contact with materials is coated with wear-resistant and anti-corrosive polyurethane resin layer, protecting the screen and extending its service life.
GN recently delivered small desanders and desilters to a drilling company in Africa.
GN Solids Control recently delivered small desanders and desilters to a drilling company in Africa. These devices are essential equipment for drilling fluid treatment, effectively removing solid particles from drilling fluids to ensure smooth drilling operations.
GN Separation will participate in MiningWorld Russia 2024
GN Separation will participate in MiningWorld Russia 2024, which will be held from April 23rd to 25th, 2024, at Crocus Expo, Pavilion 1 in Moscow, Russia. GN Separation will showcase its latest separation equipment product line at booth B5001 in Hall 2 of the exhibition.
GN Separation is a wholly-owned subsidiary of Hebei GN Solids Control Co., Ltd., specializing in the production of various separation equipment, including decanter centrifuges, disc stack separators, mining vibrating screens, sludge vacuum pumps, and screw presses. Established in 2007, GN Separation has three manufacturing plants with a total area of 110,000 square meters, aiming to provide customers with high-quality separation solutions.
To better serve international customers, GN Separation has established branches in Houston, USA, Moscow, Russia, and Australia. The company has introduced advanced automated production equipment, including welding robots, laser cutting machines, and CNC machining centers, to ensure product quality and production efficiency.
Hebei GN Solids Control Co., Ltd., and its subsidiary GN Separation, have passed ISO9001, ISO14001, and ISO45001 quality management system certification, and its products have obtained CE certification in the European Union and EAC certification in Russia. The company adopts ERP cloud and CRM cloud management systems to provide comprehensive customer service and support.
At the MiningWorld Russia 2024 exhibition, GN Separation will showcase its main product lines, including Decanter Centrifuge, Disc Stack Separator, Mining Vibrating Screen, and various conveying equipment. Company representatives will interact with visitors, share product features and application cases, and look forward to establishing connections with existing customers and potential partners to discuss solutions and achieve win-win cooperation.
GN Solids Control Sends Drilling Fluid Sand Pump and Mud Agitator to African Customers
In the global oil and gas industry, ensuring the quality and stability of drilling fluids is crucial. To meet the needs of African customers, GN Solids Control provides high-performance sand pumps and mud agitators, which not only improve the efficiency of drilling fluid handling but also ensure the safety and reliability of operations.
GN Solids Control Leads the Way with Advanced Drilling Cuttings Management Systems
GN Solids Control focuses on the research and innovation of solid control equipment and new type Drilling Cuttings Management System, earning a good reputation in the industry. GN Solids Control is one of the earliest manufacturers in China to develop complete sets of Drilling Cuttings Management System.