Month: April 2023

GN Solids Control participated in the 2023 NEFTEGAZ Russia Oil Exhibition from April 24th to 27th in Moscow. As one of the largest world oil and gas exhibitions, it was supported by the Russian Oil and Gas Department with over 35,000 square meters exhibition space and nearly 600 exhibitors. China Group was this year’s largest national group with 150 exhibitors present at NEFTEGAZ.

As a leading oil and gas drilling mud & drilling waste management company, GN Solids Control worked together with their local partner Akros to participate in this show which attracted more than 23000 professional visitors due to travel restrictions caused by COVID-19 pandemic during past two years.

At their booth they showcased some of their latest products like Decanter Centrifuge that drew thousands of people’s attention as well as Vertical Cuttings Dryer for processing cuttings generated during exploration activities or production processes which is an important part for any successful operation process onshore or offshore . They also provided technical support regarding these products throughout all four days so that customers can get most out from them .

Overall , GN Solids Control had a great success participating 2023 NEFTEGAZ Russia Oil Exhibition where they got chance to showcase some innovative solutions related to solids control equipment & services while providing customers valuable information about them !nds of visitors attention. GN decanter centrifuge is the most popular solids control equipment for oil and gas drilling mud treatment, it can separate solid particles from liquid phase with high G force, which makes the discharged slurry much cleaner than before. The professional engineer team from GN Solids Control gave detailed introduction on how to select proper decanter centrifuge size and other related operation tips during this exhibition, which is highly appreciated by many customers who visited our booth.

2. Cuttings Dryer
   GN Cuttings Dryer was another highlight product in NEFTEGAZ show this year as well. It’s a newly developed cuttings dryers for oilfield waste management industry to reduce environmental pollution caused by drilling waste discharge into sea or river directly without any treatments before disposal., This vertical cuttings dryer has been widely used in Russia now due to its unique design and efficiency performance compared with traditional horizontal cuttings dryers..

Overall speaking, 2023 NEFTEGAZ Oil Exhibition was successful ended after 4 days continuous efforts made by all exhibitors including GN Solids Control & Akros Team members,. We look forward more business opportunities coming soon after such great exhibitions like this one!

As a branch company of GN Solids Control, GN Separation will participate the 2023 IE Expo China Environmental Show in Shanghai from Apr. 19th to Apr.21st. Here GN Separation would like to invite all our customers to visit our booth at N4-H46 (Hall 4).
GN Separation is mainly focusing on designing and building solids and liquid separation equipment, during the 2023 IE expo GN Separation will bring decanter centrifuge, solids transfer pump, oil sludge treating shaker and oil sludge decanter centrifuge.

1.GN Industrial Decanter Centrifuge
GN Separation manufactures different rotating bowl sizes decanter centrifuges, from the baby centrifuge 9 inch to the largest 30 inch bowl centrifuge. GN industrial decanter centrifuges with different beach angle and length/diameter ratio suit for various usage.

2.GN Solids Transfer Pump
GN Solids Transfer Pump is a solids moving pump especially for high density and large viscosity materials. GN Separation manufactures different models of vacuum pump from the mobile pump to the skid mounted big pump.

3.GN Oil Sludge Shaker
Shaker is the first treating unit to remove coarse particles, GN Separation manufactures 2 panels to 6 panels shaker if classified by the screen qty., or single deck and double deck shakers. Now GN Separation also manufactures big mining vibrating dewatering screen, classification vibrating screen and stack vibrating screen.

4.GN Oil Sludge Decanter Centrifuge
Decanter centrifuge is a fine particles treating unit, solids larger than 2-5 microns can be removed by GN oil sludge decanter centrifuge under larger rotating G force. GN oil sludge decanter centrifuge includes 2 phase horizontal decanter centrifuge and 3 phase disc-separator.
GN Separation is mainly focusing on environmental protection industry, until GN Separation has been providing thousands of decanter centrifuges, shale shakers, transfer pump etc to global customers. Welcome to visiting us during IE Expo and also visiting our Langfang Plants (two close to Beijing International Airport and a 3rd one in Yutian).

GN Solids Control as a leading solids and liquids separation and transfer equipment manufacturer who has long experience of building screw conveyors. Every year, GN Solids Control shipped over hundreds of screw conveyors to worldwide customers.

This month, GN Solids Control finished manufacturing of some sets screw conveyors company with Kuwait Safety Standard of drilling company. GN Solids Control also builds screw conveyors and some other solids control equipment comply with other working standard.
According to Kuwait Safety Standard, all these screw conveyors should meet the following demands:
1.Steel Grating Cover Plate: Easy to check the drilling cuttings moving inside, and if need to clean, the grating cover plate can be removed.
2.HSE Safety Sign: HSE is vital important for all workers, with GN HSE safey sign it shows clear of what the worker should be always pay attention to.  
3.Emergency Stop Pull Switch: in case of emergency, operators can stop the conveyor by pull the strip along the whole way of the conveyor.
4.Spraying System (Anti-Clog): Sometimes when the drilling cuttings has too much solids inside, and can not move smoothly or may be some sticky drilling mud run along the auger, GN spraying system is effectively used to add new fresh liquid to flush and clean.
5.Anti-collapse Steel Grating Design

GN screw conveyors are one of the most cost-effective transfer unit under certain working distance especially largely used for drilling cuttings collecting and transfer. Every GN screw conveyor is composed by multiple sections with each section length of 12ft. Based on the working transfer distance, GN Solids Control also provides customized length.

Sometimes, GN Solids Control also provides alarm and light to rise the attention for all nearby workers before starting and after starting for a little while.
GN Solids Control also provides explosion-proof motors and control boxes for this Kuwait company. As a leading solids and liquid speartion manufacturer, GN Solids Control has been provides many sets of shakers, decanter centrifuges to Kuwait drilling contractors.

GN Solids Control is a turnkey solids and slurry equipment provider with manufacturing plants based in China, and with customers from over 92 countries and regions. Last year, GN Solids Control provided one set of dredging slurry separation plant to one North American customer.
It is a city government project with complicated treating process, as one of the equipment provider GN Solids Control provides the most important dredging slurry treating components include:

1.GN 30inch Bowl Decanter Centrifuge
GN Solids Control provides 2 sets 30 inch bowl decanter centrifuge for the fine particles separation. GN Solids Control manufactures different rotating bowl sizes decanter centrifuge, from the 9 inch baby centrifuge to the 30 inch bowl giant centrifuge.

2.GN Shale Shaker
Shale shaker is the coarse solids removal unit, slurry with large stones are separate by GN shale shaker first. Based on the solids sizes, GN shale shaker can be fixed with different opening sizes shaker screens.

3.GN Desander
Desander is a batch of 10 inch cyclones fixed on top of shaker. Feeding by centrifugal pump, GN desander typically remove solids larger than 55~75 microns.

4.GN Desilter
GN desitler usually uses 4 inch desilter cyclones to eliminate solids above 25 microns.
5.GN Screw Conveyor
Screw conveyor is a cost-effective solids transfer unit within certain distance. After treated solids from shaker, desander, desilter and decanter centrifuge can be also moved by GN screw conveyor.
6.GN Mud Tanks with Auxiliary Pumps
GN Solids Control also provides the mud tanks with all the in and out mud pipes. To keep this whole dredging slurry system running well, GN Solids Control also provides mud centrifugal pumps and mud agitators with all the auxiliary sensors and control system.
GN Solids Control has been providing dredging system to global customers for many years. Any tough demands, GN Solids Control always have the right solution for you.

GN Solids Control has been providing hundreds sets of oil sludge treating units to global customers for many years with one latest 15 m3/h system GN shipped to one Middle East Company.
GN Oil sludge treating system is designed to treat the oil sludge from drilling rig sites, from tank bottom, and from refinery plant etc. Usually those high density, large viscosity drilling sludge can be treated by GN oil sludge system into clean oil, water and solids.

Here are the main treating components in this GNOST-15 system:
1.Pump Transfer Unit
Usually GN Solids Control suggests to use vacuum pump to collect the sludge and feed into GN oil sludge unit as other pumps can not provide enough power to move the high viscosity sludge.

2.Coarse Shaker Unit
GN Solids made coarse shaker GNLMP126 runs at linear motion, fixed with PU screen panel to remove big particles from the oil sludge, like stones, aggregates etc.
3.Crushing Unit
In order to protect the afterwards equipment, GN Solids provides one crushing unit to prepare the materials into fine particles.
4.Pre-heating and Mixing Unit
It is necessary to have a pre-heating and mixing unit in order to get clean oil and solids. Hot pipes along the inside of tank keep the oil sludge running smoothly and with added chemicals to dilute the oil sludge.
5.Fine Shaker Unit
GN Solids Control fine shaker GNZS706 is a double deck unit fixed with 6 pcs screen panels. Slurry are treated by the top deck first and then the bottom deck.

6.Decanter Centrifuge Unit
Decanter centrifuge is the finest separating unit, can remove solids larger than 2-5 microns when running at high speed. GN made decanter centrifuge GNLW553 rotating bowl is duplex stainless steel, and screw propeller protected by tungsten carbide tiles.

7.Three Phase Decanter
In order to have a 3 phase separation, GNSD-125 is used after the 2 phase decanter centrifuge.
8.Chemical Dosing Unit
Only mechanical separation is not easy to achieve a good separating result, so GN Solids provides a automatic chemical power adding unit to provide constant chemicals to the pre-mixing tank, decanter centrifuge and 3 phase decanter.