GN Solids Control manufactures different types of transfer pumps, among them GN Solids Vacuum Pump is a high efficiency transfer pump especially designed to move high solids content materials such as drilling waste.
This week GN Solids Control finished manufacturing of 2 sets vacuum pumps and will be delivered to Africa before China New Year holidays.

Vacuum pump is an air driven transfer unit, connected with air compressor or air source at the rig site. GN Solids Control shipped one wheel type 20B vacuum pump and one skid type 40B vacuum pump.
In fact, most of the oil & gas drilling waste is not easy to move as they usually have high solids content and viscosity. But GN made vacuum pump is able to suck and discharge any moveable materials as long as size less than 75 mm. Furthermore, it can pump the material to max. 1000 meters.
As for these 2 vacuum pumps, this African customer will use it to remove oil drilling cuttings in the rig site. When the vacuum pump is under operation with a proper air pressure, drilling cuttings are sucked into the pump shell first for some seconds with the inlet gate valve open, then the inlet gate valve will close and the outlet gate valve will open so the cuttings can be discharged.
 
GN Vacuum pump can work under automatic mode after set the two timers, and it can also work under manual mode to control the suck and discharge by operator.
Besides drilling waste or cuttings after treated by shaker, mud cleaner and centrifuge, GN vacuum pump can be also used for drilling mud transfer, waste pit cleaning, oil sludge removal from tank bottom, construction materials such as sands, silts, aggregates.
GN Solids Control also provides SS vacuum pump besides carbon steel for some special material usage. Welcome to connect with GN sales reps. for you customized cost-effective solution.